Search Results: ED*

BAS-PTS009C-EN_12122025

Document Title:	Symbio™ 800 Integration Points List BACnet® for CenTraVac™ Simplex/Duplex Water-cooled Chillers with Symbio™ Controls
Publication Type:	Points List
Publication Date:	2025-12-12

use by the building automation system (BAS). When used, these points are written internally to arbitration logic. This defines the interaction with hardwired points, editable software configuration points and the relinquish default value/state. Refer to the Appendix for additional information. Input

TCA-SVX001B-EN_01282026

vacuumcleaner. If a vacuum cleaner is not available, a soft non-metallic bristle brush may be used. In either case, thetool should be applied in the direction of the fins. Coilsurfaces can be easily damaged (fin edges bent over) ifthe tool is applied across the fins. Maintenance Procedures 84 TCA-SVX001B-EN

BAS-PTS003C-EN_12172025

Document Title:	Symbio™ 800 Integration Points List BACnet®/Modbus™ for IntelliPak™
Publication Type:	Points List
Publication Date:	2025-12-17

all read/write. These points are provided for use by the building automation system (BAS). When used, these points are written internally to arbitration logic. This defines the interaction with hardwired points, editable software configuration points and the relinquish default value/state. Refer to

TF-SVX001B-EN _01122026

Document Title:	Thermafit™ Modular Air-Source Multipipe - Model MAS
Publication Type:	Installation Operation and Maintenance
Publication Date:	2026-01-12

parties areadvised.Initial safety checks shall include:• Cabling is not subject to wear, corrosion, excessive pressure, vibration, sharp edges, or any other adverseenvironmental effects. Account for the effects of agingor continual vibration from sources such ascompressors or fans. • Capacitors are

TEMP-PRC012A-EN_01152026

Document Title:	Trane Rental Services - Electrical Cable
Publication Type:	Product Catalog or Quick Reference Guide
Publication Date:	2026-01-15

lengths not to exceed 24-inches where passing through the wall of anenclosure.Reference: NEC Code, Table 400.5(A)(2) 2014 Edition. Component Specification 14 TEMP-PRC012A-EN Correction FactorsFor ambient temperatures other than 30°C (86°F), multiply the allowable ampacities shown above by the appropriate

WSHP-PRC040B-EN_01122026

64.10 90 230/60/3 207 254 57.0 28.5 255.0 2 64.10 90 460/60/3 414 506 27.0 13.5 123.0 2 30.40 40 575/60/3 518 633 21.4 10.7 93.7 2 24.10 30 48 WSHP-PRC040B-EN Dimensional DataFigure 8. EXW*060 TOP VIEW BACK VIEW WEIV TNORFWEIV EDIS ISO VIEW SOURCE SIDEHEAT EXCHANGER LOAD SIDEHEAT EXCHANGER CONTROL

WSHP-SVX023C-EN_01122026

BACK VIEW WEIV TNORFWEIV EDIS ISO VIEW SOURCE SIDEHEAT EXCHANGER LOAD SIDEHEAT EXCHANGER CONTROL BOX CONTROL BOX ACCESS HIGH VOLTAGEØ1 1/8 [28.6] 24 VOLTØ7/8 [22.2] 40[1016] 20[508] 5/8[17] 4 1/8[105] 1 1/4 [32] 15 1/2 [393] 3 3/8 [87] 13 3/8 [341] 3 7/8[100] 5[127] 14 1/2 [368] 10 1/8 [257] 22[559

RT-SVX080C-EN_01172026

restraint equipment thatwill not allow an individual to reach the unit edge.However such equipment will NOT prevent falling tothe ground, as they are NOT designed to withstandthe force of a falling individual. The fall restraint is located approximately 3 feet from theunit edge. Figure 108. Fall

RT-SVX087D-EN_01172026

Document Title:	IntelliPak 2 Commercial Rooftop Air Conditioners
Publication Type:	Installation Operation and Maintenance
Publication Date:	2026-01-17

be retained by the unit owner for use by maintenancepersonnel. This unit is equipped with Symbio 800 controls. Refer to the“Start-Up” and “Manual Override” procedures within thisInstallation, Operation, and Maintenance manual and thelatest edition of the appropriate programming manual forVariable Air

RT-PRC124C-EN_12132025

cutting edge technologies: reliable compressors, Trane engineered controls, 100 percent factory tested, and Integrated Comfort™ Systems. Whether you’re the contractor, the engineer, or the owner, you can be certain Horizon Flex products are built to meet your needs. CopyrightThis document and the