Search Results: ED*

18-CD19D8-20_12012011

Document Title:	Installer's Guide - Upflow/Horizontal and Downflow/Horizontal, Gas-Fired, Direct Vent, 2-Stage Condensing Furnaces with Variable Speed Inducer Models: AUX2, TUX2, ADX2, TDX2.
Publication Type:	Installation
Publication Date:	2011-12-01

installa-tion of gas fired equipment, wiring, plumbing, and flueconnections must be adhered to. In the absence of local codes,the installation must conform with latest edition of theNational Fuel Gas Code ANSI Z223.1 • National InstallationCode, CAN/CGA B149.1. The latest code may be obtainedfrom

18-CD24D1-6_03012011

Document Title:	Installer's Guide - Variable Speed, 2-Stage, 80 percent Upflow/ Horizontal Gas-Fired Furnaces, Fan Assisted Combustion System with Whole House Air Cleaner Models: AUD2-AFV, TUD2-AFV
Publication Type:	Installation
Publication Date:	2011-03-01

and local utility requirements governing theinstallation of gas fired equipment, wiring, plumbing,and flue connections must be adhered to. In the ab-sence of local codes, the installation must conform withlatest edition of the National Fuel Gas Code ANSIZ223.1 • National Installation Code, CAN/CGA

18-CH52D1-1_11012009

Document Title:	Service Installer's Guide 80 Volt SiNi Igniter Assembly IGN00145
Publication Type:	Installation
Publication Date:	2009-11-01

have an uninterrupted or unbroken ground according to National Electrical Code, ANSI/NFPA 70 - "latest edition" and Canadian Electrical Code, CSA C22.1 or local codes to minimize personal injury if an electrical fault should occur. A failure to follow this warning could result in an electrical shock

18-GE06D1-4_03012007

Document Title:	Installer's Guide- II systems Convertible Variable Speed Two Circuit Air Handler 3 - 5 Ton 4TEE3F62B1000A
Publication Type:	Installation
Publication Date:	2007-03-01

2 waterdiverter baffles to be placed underneath the coilon the inside edge of the drain pan. See Figure 9.Fill the bend in the baffle which fits the inneredge of the drain pan with RTV type adhesive/sealant before installing the baffle. h. The unit is then placed with the blower sidedown and the

18-GE09D1-9_04012009

Document Title:	Installer's Guide Convertible Air Handlers 1-1/2 - 5 Ton 2/4TEH3F18A1000A, 24, 30, 36, 42, 48, 60
Publication Type:	Installation
Publication Date:	2009-04-01

gasket in each side of thedrain pan as shown in Figure 9. h. Place the 2 water diverter baffles (5 ton modelonly) underneath the coil on the inside edge of the drain pan, Figure 9. Fill the bend in thebaffle which fits the inner edge of the drain panwith non-acetic acid RTV type adhesive

18-GJ01D1-4_07012010

Document Title:	Installation Guide - Conversion Kit Guide Conversion to Downflow Horizontal Models 4TEE3C01 to 4TEE3C10 and 4TEE3D01 to 4TEE3D10
Publication Type:	Installation
Publication Date:	2010-07-01

water diverter baffles to be placed underneath the coil on the in-side edge of the drain pan. See Figure 9. Fill the bend in the baffle which fits the inner edge of the drain pan with non-acetic RTV type adhesive/seal-ant before installing the baffle. You can place the coil on its back to simplify

18-GJ46D1-3_02012017

Document Title:	Installer's Guide KIT18053 Door Panel Fastener Kit for Air Leakage for Hyperion and ForeFront Air Handlers
Publication Type:	Installation
Publication Date:	2017-02-01

/or property damage. The manufacturer or seller cannot be responsible for the interpretation of this information, nor can it assume any liability in connection with its use. SAFETY HAZARD! Sharp Edge Hazard. Be careful of sharp edges on equipment or any cuts made on sheet metal while installing or

18-HD70D1-2_08012011

Document Title:	Installation Guide Modulating Zone Dampers
Publication Type:	Installation
Publication Date:	2011-08-01

unit and 24V controlled outdoor unit 3 Zone Panel (required) 4 Zone Sensor with Display (optional) 5 Zone Sensor (optional) 6 Modulating Zone Dampers * A or T Section 1. Safety SAFETY HAZARD! Sharp Edge Hazard. Be careful of sharp edges on equip-ment or any cuts made on sheet metal while installing or

18-HE57D1-2_10012006

Document Title:	American Standard Installation Guide Filter Enclosure Perfect Fit
Publication Type:	Installation
Publication Date:	2006-10-01

. IMPORTANT: The gasket material will provide a seal be-tween the enclosure and the bottom of the unit. It should beplaced toward the outside edge of the flange. The outer edgescrew holes on the enclosure flange must be used to attachthe filter enclosure. 4. Position the filter enclosure on the

18-HE94D1-1_12012012

Document Title:	Installer's Guide - Whole House Air Cleaner Internal Control Board Replacement.
Publication Type:	Installation
Publication Date:	2012-12-01

ensure the power cannot be inadvertently energized. Failure to follow this warning could result in serious personal injury, death or property damage. � WARNING! � CAUTION!SAFETY HAZARD! Sharp Edge Hazard. Be careful of sharp edges on equipment or any cuts made on sheet metal while installing or