Search Results: ED*

18-AD42D1-1D-EN_07012024

Document Title:	Installer's Guide - Cased Aluminum "Convertible" Coil 4TXCB004DS3HCC, 4TXCD010DS3HCBV, and 4TXCD010DS3HCC
Publication Type:	Installation
Publication Date:	2024-07-01

shown in Figure 4. Make sure to start by matching up the edge of the gasket material to the inner edge of the drain pan by the coil fins and working outwards. d. The gasket material can be cut or ripped easily so that it can be tailored to fit. The gasket material must cover the three sides along the

AHR-SVN001A-EN_06192025

Document Title:	Installer's Guide Supplementary Electric Heaters
Publication Type:	Installation
Publication Date:	2025-06-19

snips, cut the four tabs located at the centerpoints of the edges of knockout plate. 4. Discard knockout plate.5. Slide the heater into the opening.6. Secure the heater to the control box opening with four screws located at the corners of the mount plate. Figure 2. Mount plate 7. Locate the two

FNR-PSD005A-EN_07012025

Document Title:	Link Communicating or 24 Volt Gas-Fired 2 Stage Induced Draft Furnaces with Variable Speed Motor
Publication Type:	Product and Submittal Data
Publication Date:	2025-07-01

DUncrated (in.) 34 x 14.5 x 28.75 34 x 17.5 x 28.75 34 x 17.5 x 28.75Crated (in.) 35.5 x 16.5 x 30.87 35.5 x 19.5 x 30.87 35.5 x 19.5 x 30.87WeightShipping (Lbs.)/Net (Lbs.) 102/94 132/124 137/129 (a) Central Furnace heating designs are certified to ANSI Z21.47 - latest edition.(b) For U.S. applications

FNR-PSD015A-EN_07012025

Document Title:	Upflow/Downflow/Horizontal Gas-Fired, 1–Stage Non-Condensing Induced Draft Furnaces with High Efficiency Motor
Publication Type:	Product and Submittal Data
Publication Date:	2025-07-01

— Shipping (Lbs.)/Net (Lbs.) 102 / 94 128 / 120 132 / 124 (a) Central Furnace heating designs are certified to ANSI Z21.47 - latest edition.(b) For U.S. applications, above input ratings (BTUH) are up to 2,000 feet, derate 4% per 1,000 feet for elevations above 2,000 feet above sea level.(c) Based on U.S

FNR-PSD001A-EN_07012025

Document Title:	Upflow/Horizontal Left/Right Gas-Fired, Single Stage Induced Draft Furnace with High Efficiency Variable Speed Blower Motor
Publication Type:	Product and Submittal Data
Publication Date:	2025-07-01

.) 100 / 92 110 / 102 123 / 115 146 / 134(a) Central Furnace heating designs are certified to ANSI Z21.47 - latest edition.(b) For U.S. applications, above input ratings (BTUH) are up to 2,000 feet, derate 4% per 1,000 feet for elevations above 2,000 feet above sea level.(c) Based on U.S. government

IAQR-SVX001B-EN_07092025

Document Title:	Dehumidifier – 5DHUM70
Publication Type:	Installation Operation and Maintenance
Publication Date:	2025-07-09

burn.• Be cautious that refrigerants may be odorless. CAUTIONSharp Edges!Failure to follow instructions below could result inminor to moderate injury.The service procedure described in this documentinvolves working around sharp edges. To avoid beingcut, technicians MUST put on all necessary

IAQR-SVX002B-EN_07092025

Document Title:	Dehumidifier – 5DHUM098/5DHUM120
Publication Type:	Installation Operation and Maintenance
Publication Date:	2025-07-09

).• Do not pierce or burn.• Be cautious that refrigerants may be odorless. CAUTIONSharp Edges!Failure to follow instructions below could result inminor to moderate injury.The service procedure described in this documentinvolves working around sharp edges. To avoid beingcut, technicians MUST put on all

ODR-SVN006B-EN_08232025

damage.When opening the suction and liquid line servicevalve, turn the valve stem counterclockwise only untilthe stem contacts the rolled edge. Do not applytorque. WARNINGElectrical Shock Hazard!Failure to follow instructions below could result indeath or serious injury or property damage.Confirm proper

AHR-SVX008A-EN_09052025

Document Title:	Air Handler
Publication Type:	Installation Operation and Maintenance
Publication Date:	2025-09-05

warm gas pipes). They must also avoidintersecting metal beams, the edge of theceiling, or touching any metal burrs, or sharpmetal edges. • Do not pull, stretch, or bend the wires.• Refer to the circuit diagram on the unit or the electrical box to connect wires correctly.• Tighten all screws.• Firmly

ODR-SVX012A-EN_09052025

Document Title:	Inverter Side Discharge HP
Publication Type:	Installation Operation and Maintenance
Publication Date:	2025-09-05

aschimney pipes or warm gas pipes). They mustalso avoid intersecting metal beams, the edge ofthe ceiling, or touching any metal burrs or sharpmetal edges. • Do not pull, stretch, or bend the wires.• Firmly connect the wiring to the terminal board.• Replace damaged power cords by specialized wires