Search Results: ED*

BCX-SVX003D-EN_12052025

configuration of switches on CSTI adapterboard matches depiction of switches on the unitschematic. ☐ Ensure that all wires are plugged in securely.☐ Ensure that edge protection on sharp edges, grommets, and wire management devices aremaintained when replacing components. ☐ Ensure that blunt-tip screws are used

UV-SVX006C-EN_12052025

Document Title:	Vertical Classroom Unit Ventilator
Publication Type:	Installation Operation and Maintenance
Publication Date:	2025-12-05

number and shaft configuration printed on an affixed label. ☐Ensure that configuration of switches on CSTI adapter boardmatches depiction of switches on the unit schematic. ☐ Ensure that all wires are plugged in securely. ☐Ensure that edge protection on sharp edges, grommets, and wiremanagement

UV-SVX007C-EN_12052025

areadvised.Initial safety checks shall include:• Cabling is not subject to wear, corrosion, excessive pressure, vibration, sharp edges, or any other adverseenvironmental effects. Account for the effects of agingor continual vibration from sources such ascompressors or fans. • Capacitors are discharged. This shall be

BCX-PRC003C-EN_12052025

Document Title:	Blower Coil Air Handler
Publication Type:	Product Catalog or Quick Reference Guide
Publication Date:	2025-12-05

unit fan. The controller compares the amount of fan runtime against an adjustable fan run hour (stored in the controller) to determine when maintenance is recommended for the unit.The run-hours value may be user edited as required (Tracer® TU). The valid range for the fan run hours limit is 0 to

UV-PRC006C-EN_12052025

space for the coil to avoid cold spots that could causefreezing. Indoor Air QualitySchool institutes contain a diverse day of activities that have a potential for air impurity sources including cafeterias, art andscience classrooms, vocational education areas, pools and locker rooms. Proper

WSHP-SVX024B-EN_12012025

Document Title:	Water Source Heat Pump Axiom™ Variable Speed – VSH/VSV
Publication Type:	Installation Operation and Maintenance
Publication Date:	2025-12-01

parties areadvised.Initial safety checks shall include:• Cabling is not subject to wear, corrosion, excessive pressure, vibration, sharp edges, or any other adverseenvironmental effects. Account for the effects of agingor continual vibration from sources such ascompressors or fans. • Capacitors are

VRF-WPR001A-EN_10292025

Document Title:	The Impact of A2L Refrigerants on VRF System Design - White Paper
Publication Type:	White Paper
Publication Date:	2025-10-29

” refers to the process of removing air (along with leaked refrigerant) from a space to reduce https://www.trane.com/commercial/north-america/us/en/education-training/educational-resources.html 3 the concentration of refrigerant in that space. This is different than ASHRAE® Standard 62.1, in which

SO-SVN026C-EN_12052025

back of the cabinet is level andlined up against the Z-bracket, then attach thecabinet to the bracket using the kit hardwareprovided (screws for the motor terminal access).Shims may be necessary to level the lowermounting bracket. The front edge of the evaporatorbrackets may need to be ground down to

WSHP-SVG004A-EN_12072025

Document Title:	Water Source Heat Pump Axiom™ Variable Speed – Compressor Inverter
Publication Type:	Installation Operation and Maintenance
Publication Date:	2025-12-07

. Loosen the two screws on the operation panel. (These screws cannot be removed.) Figure 3. Loosen screws 2. Press the upper edge of the operation panel whilepulling out the operation panel. Figure 4. Remove operation panel To reinstall the operation panel, align its connector onthe back with the PU

CLCH-SVX021C-EN_12192025

anchors at 24 in. o.c. • 4 3/4-in. min. anchor embedment• 9-in. min. distance to the nearest edge• 8-in. min. concrete slab thickness b. On steel dunnage/steel curb:• 3/4-in. dia ASTM A325 or SAE grade 5 bolts at 24 in. o.c. or• 1-in. long 3/16-in. welds at 24-in. o.c. 2. Stacked single-wide<164 in