Search Results: ED*

RT-SVX21AD-EN_06172022

nameplate. • Verify that the installation location of the unit will provide the required clearance for proper operation. • Assemble and install the roof curb (if applicable). Refer to the latest edition of the curb installers guide that ships with each curb kit. • Fabricate and install ductwork

RT-SVX23R-EN_09222022

model, options and voltage from unit nameplate. • Verify that the installation location of the unit will provide the required clearance for proper operation. • Assemble and install the roof curb (if applicable). Refer to the latest edition of the curb installers guide that ships with each curb kit

PKGP-SVX010C-EN_08192023

Document Title:	Packaged Rooftop Air Conditioners Precedent™ Heat Pump Standard Efficiency 12.5 to 25 Tons — 60 Hz
Publication Type:	Installation Operation and Maintenance
Publication Date:	2023-08-19

is not equipped with an optionalfactory installed non-fused disconnect switchor circuit breaker, a field supplied disconnectswitch must be installed at or near the unit inaccordance with the National Electrical Code(NEC latest edition). Main Unit PowerWARNING Proper Field Wiring and

PKGP-SVX011C-EN_08192023

Document Title:	Packaged Rooftop Air Conditioners Precedent™ Heat Pump High Efficiency 12.5 to 25 Tons — 60 Hz
Publication Type:	Installation Operation and Maintenance
Publication Date:	2023-08-19

with an optionalfactory installed non-fused disconnect switchor circuit breaker, a field supplied disconnectswitch must be installed at or near the unit inaccordance with the National Electrical Code(NEC latest edition). Main Unit PowerWARNING Proper Field Wiring and GroundingRequired!Failure to

PKGP-PRC019D-EN_09302023

performancerequirements, and are competitively priced. Trane delivers with Precedent™.Precedent™ features cutting edge technologies: reliable compressors, Trane engineered Symbiocontrols, computer-aided run testing, and Integrated Comfort™ Systems. So, whether you’re thecontractor, the engineer, or the owner

PKGP-PRC021D-EN_09302023

performancerequirements, and are competitively priced. Trane delivers with Precedent™.Precedent™ features cutting edge technologies: reliable compressors, Trane engineered Symbiocontrols, computer-aided run testing, and Integrated Comfort™ Systems. So, whether you’re thecontractor, the engineer, or the owner you

ACC-SVN98F-EN_04212020

Document Title:	Oversize Motor Kit
Publication Type:	Installation
Publication Date:	2020-04-21

in place. 12.Check alignment of blower sheave and motor sheave using a straight edge, and adjust if necessary. Torque the motor sheave set screw and the fan sheave set screw to 126-165 inch pounds (14.2-18.6 N-m). 13.Install the proper belt. (Refer to Table 2, p. 2). NOTICE Equipment Damage!Proper

ACC-SVN97E-EN_04212020

Document Title:	High Static Drive Kit
Publication Type:	Installation
Publication Date:	2020-04-21

motor mounting plate. 3. Remove the existing fan sheave (for 50 Hz, remove the existing motor sheave). 4. Install the replacement fan sheave (for 50 Hz, install the replacement motor sheave). 5. Check the alignment between the fan and motor sheaves using a straight edge. Adjust as necessary. Torque the

RT-SVX46G-EN_01162021

Emissions17,18,19,20,21,22,23 Model Number Notes1. Standard on all eFlex™ and eDrive™ units. 2. Economizer with Barometric Relief is for downflow configured units only. Order Economizer without Barometric Relief for horizontal configuration. Barometric Relief for horizontal configured units must be

ACC-SVN139M-EN_06262023

Document Title:	CO2 Sensing Kit Used with Precedent™ 17 Plus, Multi-Speed Indoor Fan, Single Zone VAV (SZVAV)
Publication Type:	Installation
Publication Date:	2023-06-26

theraceway and between the roof and coil block-off in line withone of the roof ribs. See Figure 1, p. 4. Figure 2. Y/TZC120, D/WHC120, D/WHC090**,D/WSC120** units (digit 30 = E) Y/TZC120, D/WSC120** (digit 30 = E)Route wiring through the bracketfix ed in top coil blockoff ReturnAir/Filter Access Panel