Search Results: ED*

BAS-SVX094A-EN_07142024

Document Title:	Symbio™ Communication Module (CM2)
Publication Type:	Installation Operation and Maintenance
Publication Date:	2024-07-14

compatible with this module.4. Select Actions > Configure Settings to view/edit the Modbus communication settings of the CM2 module.Note: Confirm the settings prior to defining the first Modbus server, as the definition process is streamlined when the device is connected and communicating. Figure 10

SS-PRC049A-EN_08112024

available in a variety of voltages and capacities.Foil Faced Insulation—All internal air handler surfaces have cleanable foil-faced insulation. All edgesare either captured or sealed to ensure insulation fibers do not get into the airstream.High Static Motor—Available on many models, this high

PART-SVN266A-EN_09152024

controller.5. Navigate to Installation > Identification and Communication > Protocol Configuration > Edit.6. Set the rotary dial setting (address) by clicking the line and typing in the new address.7. If the Device ID needs to be changed, check the box next to Use software device ID and enter the

CLCH-SVX010E-EN_08152024

for Large Unit with Shipping Splits 16 Joining Sections Edge-to-Edge . . . . . . . . . 16 Base with Flat Floor . . . . . . . . . . . . . . . . . . 17 Base with Turned-Up Floor . . . . . . . . . . . . 18 Walls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Outdoor Roof - Single Span

ACC-SVN187D-EN_08232024

Document Title:	Oversized Motor Kit - Foundation™ Packaged Rooftop Units
Publication Type:	Installation
Publication Date:	2024-08-23

alignment of blower sheave and motor sheave using a straight edge, and adjust if necessary. Torque the motor sheave set screw and the fan sheave set screw to 126 to 165 inch-pounds (14.2 to 18.6 N-m). 14.Install the belt. 15.Adjust the tension of the fan belt. The correct operating tension for a V-belt

ACC-SVN189D-EN_08232024

Document Title:	Through-the-Base Gas and Electric Connections - Foundation™ Packaged Rooftop Units
Publication Type:	Installation
Publication Date:	2024-08-23

to 5 Tons Model Number: Used With:Through-the-Base Electric BAYTBUE320* G/EB*036-060 G/ED*036-060 Through-the-Base Gas BAYTBGF320* GB*036-060 GD*036-060 August 2024 ACC-SVN189D-EN ©2024 Trane and American Standard have a policy of continuous product and product data improvement and reserve the

ACC-SVN192D-EN_08232024

Document Title:	Roof Curb - Foundation™ Packaged Rooftop Units
Publication Type:	Installation
Publication Date:	2024-08-23

be installed.• The metal of fiberboard duct must conform to all local building codes.• The duct must be hung from the curb flanges inside the curb walls. Important: Duct work must be hung from the curb flanges. Do not install over the top edges of the curb. • When the duct is fabricated, it should

ACC-SVN195E-EN_08232024

Document Title:	Unit Mounted Disconnect - Foundation™ Packaged Rooftop Units
Publication Type:	Installation
Publication Date:	2024-08-23

DisconnectFoundation™ Packaged Rooftop Units3 to 5 Tons Model Number: Used With:BAYDSCF322* E/GB*036-060****B* E/GD*036-060****B*, Cooling Only/Gas HeatBAYDSCF323* EB*036-060****B* ED*036-060****B*, 5 to 25 kW Electric Heat August 2024 ACC-SVN195E-EN 9 1110 12 8 ©2024 Trane and American Standard have a policy

TEMP-SLB005-EN_08092024

. Technical Support, Trouble Shooting, 24/7 Emergency Dispatch 800-755-5115 SCAN ME https://www.trane.com/commercial/north-america/us/en/services/rentals.html 1Design Conditions: 95°F Ambient, 80°F EDB, 71°F EWB, 400 CFM/Ton 25 Ton Trane Precedent Heat Pump with Electric Heat Lifting Device

ACC-SVN203E-EN_08232024

Document Title:	0 to 100% Low Leak Economizer — Downflow - Foundation™ Packaged Cooling and Gas/Electric
Publication Type:	Installation
Publication Date:	2024-08-23

items11 12 13 14 15 16 6 ACC-SVN203E-EN Installation Field Installed Option Economizer and Fresh Air Hood Installation 1. Remove the filter access panel, unit end panel and horizontal return panel. See Figure 3. 2. Assemble economizer onto unit. Align edge of both side of economizer panel flange