Search Results: DHC*

PKGP-PRC013AA-EN_12202022

/DHC060H3 187-253 32 45 27 40 5 W/DHC060H4 414-506 15 20 12 15 5 W/DHC060HW 517-633 12 15 — — 6 W/DHC074H3 187-253 42 50 - - 6 W/DHC074H4 414-506 19 25 - - 6 W/DHC074HW 517-633 21 25 - - 7.5 W/DHC092H3 187-253 43 50 - - 7.5 W/DHC092H4 414-506 20 25 - - 7.5 W/DHC092HW 517-633 22 25 - - 8.5 W/DHC102H3

OAU-SVX007C-EN_11082023

minutes (adj 10 to 25 minutes). If DAT exceeds Discharge Air High Temperature Cutoff (DHCS) of 125°F for 10 minutes for gas heat or 90°F for electric heat, the unit will shut down and require manual restart. Outdoor Air Temperature and Relative Humidity SensorThis factory installed combination outdoor

BAS-SLB148-EN_03142024

Document Title:	BACnet/Secure Connect
Publication Type:	Sales Brochure
Publication Date:	2024-03-14

buildings in Tracer Ensemble can be done quickly by Trane Technicians, without IT intervention. • DHCP is allowed for the SC+, Static IPs are not required. • BACnet/SC works without an IPSec Tunnel. • Works immediately with most firewalls (uses Outbound TCP port 47808) Trane is committed to maintaining and

BAS-SLB124-EN_03012024

Document Title:	Tracer® Ensemble® Cloud IT & Cyber Security Summary
Publication Type:	Sales Brochure
Publication Date:	2024-03-01

controllers and Tracer Ensemble settings. Once configured, the active BACnet/SC ports are TCP 47808. Outbound-only traffic is required to establish the connection, so often IT intervention isn’t required. In addition, BACnet/SC supports DHCP (static IPs are not required) , technicians can add

BAS-SVX094A-EN_07142024

Document Title:	Symbio™ Communication Module (CM2)
Publication Type:	Installation Operation and Maintenance
Publication Date:	2024-07-14

display is to be plugged into this port. Obtain IP address automaticallyusing DHCP Select this option to allow for a network DHCP server to dynamically assign an IP address tothe device. Use the following IP address Select this option to manually enter a static IP address specific to the application

ACC-SVN01R-EN_09152024

Document Title:	0 to 50% Manual Outside Air Damper Precedent™ Packaged Rooftop Units 3 to 12.5 Tons
Publication Type:	Installation
Publication Date:	2024-09-15

handling live electrical components perform these tasks. Table 1. T/Y/W/DS*036, T/YH*036, W/DHC036H Damper Position Return Static - Inch W.G. -0.1 -0.2 -0.3 -0.4 -0.5 -0.6 -0.7 A 80 100 120 140 170 200 240 B 200 240 300 360 420 490 570 C 310 410 510 610 — — — D 410 540 — — — — — E 520 — — — — — — Insert

BAS-SVX080D-EN_02142025

hosted Wi-Fi network (default is 6).10. Define the DHCP configuration. This establishes the range of IP address the Symbio 800 will assign to clients that join the hosted network and the duration of each lease. Defaults are shown in Figure8, p. 22. Figure 8. DHCP Configuration (Host Mode) 11. Click

OAU-SVX008B-EN_03092025

Air Temperature (DTC) Discharge Air Temperature Setpoint Maximum (MDTS) is 120°F (range of 80°F to 120°F) for gas heat and 90°F for electric heat. If DAT exceeds Discharge Air High Temperature Cutoff (DHCS) of 125°F for 10 minutes, the unit will shutdown and require manual restart. Outdoor Air

RT-SVX23R-EN_09222022

829 193 295 65 276 38 22 8.5 WHC102H 953 855 199 306 67 283 39 22 10 WHC120H 1433 1228 357 343 259 269 49 27 3 DHC036H 658 553 145 137 125 145 33 22 4 DHC048H 845 750 234 192 146 178 40 23 5 DHC060H 849 754 235 193 147 179 40 23 6 DHC074H 990 892 216 324 69 283 39 21 7.5 DHC092H 1004 906 218 330 70

DC-SVX001A-EN_04302025

Document Title:	Coolant Distribution Unit
Publication Type:	Installation Operation and Maintenance
Publication Date:	2025-04-30

to access the control panel.3. Go to Network and Internet > Network Settings.4. Press the “PN-X2” button to change only the PN-X2 setting.Important: NEVER change the PN-X1 setting! a. To use the DHCP option, select “Obtain an IP address via DHCP.b. To use the static IP, select “Specify an IP address