Search Results: THER-IN-33C

18-AD60D2-2_09012001

Document Title:	Installers Guide Cased Coils
Publication Type:	Installation
Publication Date:	2001-09-01

piping connections are made inside the cabinet. Theymay enter the cabinet through factory provided knockouts. Repositioning Drain Pan The coil comes with a drain pan that can be installed in ei-ther of two positions; this allows for right or left condensateline connection. The drain pan can also be

RT-SVN046A-EN_11062021

Document Title:	Vertical and Horizontal Power Exhaust Medium Foundation Packaged Rooftops, 7.5 to 12.5 Tons 208/230V Single Phase, 460V Three Phase
Publication Type:	Installation
Publication Date:	2021-11-06

power whip from the partsbag. Route the bare wire end through the grommeton the horizontal R/A cover panel, see Figure 16, p.10 and then route the wire through the gland in theR/A opening, see Figure 17, p. 10. Fasten this wire in the R/A section where necessaryto ensure it does not interfere with

2TTR2-IN-1B_03012003

Document Title:	Installer’s Guide Condensing Units 2TTR2018-060, 2TTR1018-060 and 2TTR0060
Publication Type:	Installation
Publication Date:	2003-03-01

These instructions do not cover all variations insystems nor provide for every possible contingency tobe met in connection with installation. All phases ofthis installation must comply with NATIONAL, STATEAND LOCAL CODES. Should further information bedesired or should particular problems arise which

PART-IN-126_08012000

Document Title:	Wiring Instructions for TRR00974
Publication Type:	Installation
Publication Date:	2000-08-01

Library Service Literature Product Section Service Products Product Parts Model 000 Literature Type Installation Sequence 126 Date August 2000 File No. SV-SP-000-PART-IN-126-800 Supersedes New Installation PART-IN-126 © American Standard Inc. 2000 Since The Trane Company has a policy of continuous

PART-IN-146B_08012002

Document Title:	Installation of Replacement Classic Absorption Pump Motors , MOT0999 , MOT10000 , MOT10001 , MOT10412, MOT10413 , and MOT10414
Publication Type:	Installation
Publication Date:	2002-08-01

Library Service LiteratureProduct Section Service Products Product Parts Model ABSB, ABSC, ABTD, ABTELiterature Type Installation Sequence 146B Date August 2002File No. SV-SP-Motors-PART-IN-146B-0802 Supersedes PART-IN-146A-0901 Installation PART-IN-146B © 2002 American Standard Inc. All Rights

PART-IN-39A_08011999

Document Title:	Replacement of Thermostat THT00893 with Sensor SEN00943.
Publication Type:	Installation
Publication Date:	1999-08-01

Library Service Literature Product Section Service Products Product Parts Model HUVA, HUVB, UVCD, VUVA, VUVB Literature Type Installation Sequence 39A Date August 1999 File No. SV-SP-000-PART-IN-39A-899 Supersedes SV-SP-000-PART-IN-39-599 Installation PART-IN-39A © American Standard Inc. 1999 Since

VENT-IN-1A_08012002

Document Title:	Installer’s Guide CONCENTRIC VENT KIT for Condensing Furnaces BAYVENT100A Also stocked at Webb/Mason
Publication Type:	Installation
Publication Date:	2002-08-01

VENT-IN-1A18-CH22D1-04 CONCENTRIC VENT KITfor Condensing FurnacesBAYVENT100A Installer’s Guide ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES IMPORTANT — This Document is customer property and is to remain with this unit. Please return to service informationpack

2TWR2-IN-1B_02012003

Document Title:	Installer’s Guide Heat Pumps 2TWR1 and 2TWR2
Publication Type:	Installation
Publication Date:	2003-02-01

be set on a level support pad at least aslarge as the unit base pan, such as a concrete slab. If thisis not the application used please refer to applicationbulletin “Trane APB2001-02”. 3. The support pad must NOT be in direct contact with anystructure. Unit must be positioned a minimum of 12"from any

ECMT-IN-3_03012004

Document Title:	Installer’s Guide Extreme Condition Mounting Kit BAYECMT003A for Impack Slab Mounting
Publication Type:	Installation
Publication Date:	2004-03-01

American Standard Inc. All Rights Reserved Installer’s Guide ECMT-IN-318-HE50D1-1 Extreme Condition Mounting KitBAYECMT003A for Impack Slab Mounting KIT CONTENT:Bracket-Hold Down* and Label - Qty 4 (Height 1-7/8" for Impack and T/WCH048-60) Bracket-Hold Down* and Label - Qty 4 (Height 2-3/8" for T

PART-IN-124_08012000

Document Title:	Installation of Classic Absorption Pump Motor Tilted-Pad Thrust Bearing
Publication Type:	Installation
Publication Date:	2000-08-01

Library Service Literature Product Section Service Products Product Parts Model ABSB, ABSC, ABTB, ABTE Literature Type Installation Sequence 124 Date August 2000 File No. SV-SP-000-PART-IN-124-800 Supersedes New Installation PART-IN-124 © American Standard Inc. 2000 Since The Trane Company has a