Search Results: 18-CH94D1-1C-EN

MS-SVN32D-EN_01312013

Document Title:	Wired Controller for the Trane Variable Water Flow System / Installation Instructions
Publication Type:	Installation
Publication Date:	2013-01-31

precautions in the literature and on the tags, stickers, and labels that are attached to the equipment. January 2013 © 2013 Trane MS-SVN32D-EN All rights reserved 1Cautions, Warnings and Notices Overview The wired controller is used to control air distribution in cassette and concealed fan coil units that

PART-SVN262C-EN_03062025

Document Title:	Variable Speed Drive Replacement Kit (Precedent™ and Voyager™2)
Publication Type:	Installation
Publication Date:	2025-03-06

an unqualified person could result in death orserious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that are attached to the equipment. March 2025 PART-SVN262C-EN Installation InstructionsVariable Speed Drive

ARTC-SVX007B-EN_08152024

separators, and oil filters). 18 ARTC-SVX007B-EN Operating ProceduresOperator InterfaceThermafit™ TACW modular water-cooled units arecomplete chillers that can work on their own or workcollaboratively, in banks of up to 8 units. Chiller PanelsThere are two different electrical panels used in the

ACC-SVN303A-EN_09152024

Document Title:	0 to 100% Downflow Dry Bulb Economizer Foundation™ Packaged Cooling and Gas/Electric 15 to 25 Tons
Publication Type:	Installation
Publication Date:	2024-09-15

. Figure 16. Remove duct cover Figure 17. Remove block-off Figure 18. Remove connecting rods Figure 19. Switch return air assembly from Trane to Carrier 10 ACC-SVN303A-EN Installation 7. Attach return duct cover (7) to Trane return air inlet. See Figure 21. 8. If barometric or power exhaust is not

ACC-SVN229C-EN_09152024

Document Title:	LP Conversion Kit Precedent™ Packaged Rooftop Units 3 to 25 Tons Two-Stage
Publication Type:	Installation
Publication Date:	2024-09-15

indicator to its highest setting. The burners should light. 18. Adjust the unit manifold pressure to 10 inches water column (24.9 mbar) per the rating plate. 19. Install the access panel. Manifold Bracket Screws Manifold and ValveBracket Screws Gas Orifices 14 ACC-SVN229C-EN Notes ACC-SVN229C-EN 15 ©

SO-SVN049A-EN_10132023

Document Title:	Condenser Fan Control Retrofit RTAA Air-Cooled Chillers and RTAC Air-Cooled Condensers / Kits CNT07652 and CNT07653
Publication Type:	Installation
Publication Date:	2023-10-13

1U5-J9-3 or 1TB9-8 1U28-01 (Alarm) Field Provided 1K9-L1 Field Provided 1K13-L1 1U28-12 (+24VDC) Field Provided 1K9-T1 Field Provided 1K13-T1 1U28-18 (Enable) 12 SO-SVN049A-EN General Start-Up Review 1. When all components have been mounted and wired, close all electrical enclosures. 2. Restore

SYS-PRC002A-EN_05052026

Document Title:	Parallel Central Geothermal System Blueprint
Publication Type:	Product Catalog or Quick Reference Guide
Publication Date:	2026-05-05

°F to 65°F(-12°C to 18°C) Condenser Temperature Range Leaving Hot Water: Up to 165°F (73°C) with R-515B; Up to 140°F (60°C) with R-513A Compressor Type Dual-Circuit, High-Efficiency Helical Rotary (Screw) Compressors Refrigerant Options R-513A or R-515B Compressor Lift Capability 100°F (38°C) with R

BAS-SVN040B-EN_05012020

. Follow the steps in the Setup Wizard. See the Tracer Concierge Installation, Operation, and Maintenance Guide (BAS-SVX074) for details. Figure 12. Setup wizard 18 BAS-SVN040B-EN Installation Step 10: Installing the Wi-Fi Router Note: The Concierge Controller in its pre-wired enclosure should be

BAS-SVN141E-EN_12092023

are connected and addressed properly per the submittal and/or the Air-Fi® Network Design Installation, Operation, and Maintenance (BAS-SVX55*-EN). 18 BAS-SVN141E-EN Notes Agency Listing and Compliance United States Compliance (Enclosure and modules are UL Listed separately) UL Listed — UL 916 Energy

BAS-SVX094A-EN_07142024

Document Title:	Symbio™ Communication Module (CM2)
Publication Type:	Installation Operation and Maintenance
Publication Date:	2024-07-14

-SVX094A-EN DimensionsFigure 1. CM2 dimensions *One DIN unit = 18 mm*DIN Standard 43 880, Built-in Equipment for Electrical Installations, Overall Dimensions and RelatedMounting Dimensions Important: Slotted release clip shown– if removing or repositioning the controller, the user must removeconnectors