Search Results: ED*

RT-SVX37C-EN_04022020

Document Title:	Packaged Rooftop Air Conditioners Precedent™- Electric/Electric 5 – 10 Tons – 50 Hz
Publication Type:	Installation Operation and Maintenance
Publication Date:	2020-04-02

unit nameplate. • Verify that the installation location of the unit will provide the required clearance for proper operation. • Assemble and install the roof curb (if applicable). Refer to the latest edition of the curb installers guide that ships with each curb kit. • Fabricate and install ductwork

RT-SVX38D-EN_04022020

Document Title:	Packaged Rooftop Air Conditioners Precedent™—Gas/Electric 5 to 10 Tons—50 Hz
Publication Type:	Installation Operation and Maintenance
Publication Date:	2020-04-02

. • Verify correct model, options and voltage from unit nameplate. • Verify that the installation location of the unit will provide the required clearance for proper operation. • Assemble and install the roof curb (if applicable). Refer to the latest edition of the curb installers guide that ships with

RT-SVX39C-EN_04022020

Document Title:	Packaged Rooftop Air Conditioners Precedent™ — Heat Pump 5 – 10 Tons – 50 Hz
Publication Type:	Installation Operation and Maintenance
Publication Date:	2020-04-02

installation location of the unit will provide the required clearance for proper operation. • Assemble and install the roof curb (if applicable). Refer to the latest edition of the curb installers guide that ships with each curb kit. • Fabricate and install ductwork; secure ductwork to curb. • Rigging

CLCH-SVX08F-EN_09302025

Document Title:	Gas Heat Performance Climate Changer™ CSAA Air Handlers
Publication Type:	Installation Operation and Maintenance
Publication Date:	2025-09-30

. Installation of rain hood for combustionair opening Hood Butyl tape • Locate the bottom edge of the hood 2 3/8 inches belowthe bottom edge of the inlet air opening and center thehood left-to-right over the inlet air opening (see Figure7, p. 16). • Install the hood to the unit with number 10 screws

18-CE06D1-1B-EN_07012020

Document Title:	Installer's Guide In-line Condensate Drain Kit BAYCNDTRAP2A, BAYCNDTRAP3A
Publication Type:	Installation
Publication Date:	2020-07-29

local utility requirements governing the installation of gas fired equipment, wiring, plumbing, and flue connections must be adhered to. In the absence of local codes, the installation must conform with the Nation Fuel Gas Code ANSI Z223.1 "latest edition", or CAN/ CGA B149 Installation Codes. The

18-HE43D1-7B-EN_07082020

Document Title:	Installer’s Guide Heat Pump Snow Legs Kit
Publication Type:	Installation
Publication Date:	2020-07-15

shown in Figure 2. These grooves accommodate the edge of current angled-corner and legacy rounded-corner basepans (Not applicable to Side Discharge models or Value products). 2. For Side Discharge Models, cut mastic tape along perforations into smaller individual pieces and place in the locations shown

18-HE44D2-1A-EN_07082020

Document Title:	Installer's Guide Extreme Condition Mounting Kit BAYECMT023 and BAYECMT004
Publication Type:	Installation
Publication Date:	2020-07-15

Installer's Guide ③ LOCATE BASE TAB BRACKET AT THE INSIDE EDGE OF THE CABINET SEAM ON THE LONG SIDE OF THE UNIT (4) BOLTS & WASHERS .25" DIA. SAE GRADE 5 ASTM-A449 FIELD SUPPLIED SELF DRILLING 12-14 SCREW BACKUP CLIP BACKUP CLIP BACKUP CLIP BACKUP CLIP BASE TAB BRACKET BASE TAB BRACKET BASE TAB BRACKET

18-HE46D1-3B-EN_07082020

Document Title:	Residential Low Ambient Control Kit Installation Instructions, Model: BAYLOAM103
Publication Type:	Installation
Publication Date:	2020-07-21

(supplied) to the liquid line, where the sensor will be mounted. Using the clamp provid-ed, attach the sensor assembly as shown; Figure ③ ② A) COOLING ONLY AIR CONDITIONER LIQUID LINE TEMPERATURE SENSOR B) HEAT PUMP CONTROL BOX SENSOR WIRING ROUTING APPLY CLAMP TO SENSOR AND LIQUID LINE 2B. When

18-HE48D1-5A-EN_07082020

Document Title:	Crankcase Heater - (BELLYBAND STYLE) BAYCCHT301RES and BAYCCHT302RES use with- SCROLL COMPRESSORS (208 - 230V)
Publication Type:	Installation
Publication Date:	2020-07-15

report-ed to your supplier at once and replaced with authorized parts only. Installation: 1. Place the thermostat selector switch in the OFF position. 2. Open all unit electrical switches. 3. Remove the unit’s control box cover. Disconnect the fan motor leads. This will allow for complete removal of

18-HF10D3-1B-EN_07082020

Document Title:	Installation - Anti Short Cycle Time Delay Relay. Model TAYASCT501A
Publication Type:	Installation
Publication Date:	2020-07-21

. ASCT-IN-5A 18-HF10D3-1B-EN This accessory may be installed on any compressor bearing outdoor section using 24 VAC contactor coil.This accessory MUST be installed in a weather protect-ed area within the unit cabinet such as the control box, the fan orifice plate, etc.1. Mount time delay relay using the